• <ruby id="5usbd"></ruby>

    1. <em id="5usbd"></em>
      <em id="5usbd"></em>

      成本人H片动漫网站在线看
      Vacuum furnace
      n_bb1
      current location: Home?>>? 新闻资讯 >> Company news

      Contact information

      Taicang Huarui Vacuum Furnace Co., Ltd
      Address: No.1, Nanzhuan Road, Shuangfeng town, Taicang City
      Contact person: Zheng Xinghua
      Mobile: 13285178098
      Contact: Guan Zhanlong
      Mobile: 18606226806
      Contact person: Zheng Shuai
      Mobile: 13285179528
      Tel: 0512-88826556
      Fax: 0512-53630028
      Email: 1306769879@qq.com
      National Service Hotline:
      0512-53630028
      Website: www.emilyhammann.com

      Selection of oil surface pressure in heat treatment of vacuum quenching furnace

      Release date: 2014-04-25 00:00 source: http://www.emilyhammann.com Click:

      In the process of oil quenching heat treatment with vacuum quenching furnace, the cooling capacity of vacuum quenching oil decreases under low vacuum pressure, which may not achieve the purpose of quenching for some steels. Therefore, before using the vacuum quenching furnace to quench, it is necessary to fill a high purity neutral or inert gas into the quenching chamber to cause a certain pressure on the oil surface, so that the steel can be fully quenched and a bright surface can be obtained. The lowest surface pressure which can obtain the same quenching hardness as that under atmospheric pressure is called critical quenching pressure. The critical quenching pressure is related to the properties of vacuum quenching oil and the hardenability of steel.

      When using the vacuum quenching furnace to quench the steel with poor hardenability, the way of filling gas first and then adding oil should be used to quench. The oil level pressure should be higher than the critical quenching pressure. Generally, the adjustment is about 5 × 104pa, but it should not be lower than 1.0 × 104pa. For medium hardenable steel, the method of filling gas before oil should be adopted. The pressure of the oil surface can be adjusted at about 1.0 × 104pa, but it can not be lower than 5 × 103pa. The steel with good hardenability can be quenched by means of air charging or non air charging. The way of air charging can be adopted. The heating chamber of the vacuum furnace can be filled with air first and then oil, or oil first and then gas. When adopting the way of inflation first, the inflation pressure can be selected within the range of (2.5 ~ 5) × 104pa. In order to prevent and reduce the steam entering and polluting the heating chamber of the vacuum quenching furnace, a higher inflation pressure should be selected, and the gas used should be high-purity neutral or inert gas. The method of post inflation can be used to fill the gas with lower purity and lower inflation pressure. Adopt the way of not filling air for quenching, that is, the workpiece is not filled with neutral or inert gas before and after filling oil.

      Related tags: 真空炉

      National Hotline

      0512-53630028
      Address: No.1, Nanzhuan Road, Shuangfeng
      town, Taicang, Suzhou, Jiangsu
      Email: 1306769879@qq.com

      Pay attention to us
      Copyright ?http://www.emilyhammann.com/en/ Taicang Huarui Vacuum Furnace Co., Ltd 专业从事于Vacuum furnace,Vacuum gas quenching furnace,Vacuum oil quenching furnace, 欢迎来电咨询!
      Welcome to leave us a message
      Please enter your message here, we will contact you as soon as possible。
      Contact person
      Landline / mobile number
      Xiangyun platform technical support